The tcp/ip protocol does not bind to the wlan card – Asus PCI-G31 User Manual
Page 27
PCI-G31 WLAN Card User Manual
24
ASUS WLAN Card
My WLAN card cannot connect to a station or WLAN card.
• Check if
Network Type is set to the Ad Hoc mode.
• Check if the
SSID of your WLAN card is the same as that of the station or the
WLAN card you want to connect to.
• Check if the
Channel of your WLAN card is the same as that of the station or
the WLAN card you want to connect to.
• Check if the
Encryption settings of your WLAN card are the same as those of
the station or the WLAN card you want to connect to.
The connection quality is bad and the signal strength is weak.
• Keep your WLAN card away from microwave ovens and large metal objects to
avoid radio interference. Adjust the WLAN card antenna.
• Move your WLAN card closer to the access point, station, or WLAN card you
want to connect to.
The TCP/IP protocol does not bind to the WLAN Card.
This occurs when your PC already has six TCP/IP bindings in Windows
®
98 or ten
bindings in Windows
®
Me. These limits are imposed by the Microsoft
®
operating
system.
Solution: If your computer already has the maximum number of TCP/IP bindings,
remove one of the network adapters from the Network configuration before
installing the WLAN Card driver.