Water Inc HOUSEPURE HP01 User Manual
Page 6
Plug the transformer into an unswitched
110VAC outlet. Secure the transformer to the
outlet with the screw provided.
Filter Start-Up - programming
When powered up, the controller display will
display the Time Of Day. To
Set the time:
a. Press the UP or DOWN arrow button to
change the time displayed.
b. When the correct time is reached, release
the UP or DOWN arrow button.
13
14
15
16
Installation Manual Page 4
a. Connect bell, thermostat or sprinkler wire,
(2 conductor, solid) to the screw terminals
on the transformer.
b. Connect the wire from the transformer
to the blue wire and white wire (located
behind the electronic control panel, using
wire nuts or crimp connectors.
NOTE:
The valve is fully programmed at the
factory for backwash frequency, dura-
tion and time of day. The system is now
ready to be filled with water and back-
washed.
CAUTION:
Read the following instructions carefully
first. The start-up procedure must be fol-
lowed correctly to ensure the best perfor-
mance from the system and to prevent
any possible problems.
!
DO NOT OPEN THE INLET WATER
SUPPLY VALVE UNTIL INSTRUCT-
ED TO DO SO!
a
b
Connect the
transformer to
the blue wire and
white wire found
behind this panel.
Connect wire to the
screw terminals on
the transformer.