Water Inc HOUSEPURE HP01 User Manual
Page 5
Assembling the Filter - basic connections
a. Remove the tank from the box.
b. Place the tank on a level surface near the
final installation position.
c. Place the tank within 8 feet of a 110VAC
outlet and within 10 feet of a drain..
a. Remove the package of components, parts
and tubing from the box.
b. Install the bypass valve onto the control
valve assembly as shown above.
4
3
2
1
Installation Manual Page 3
a. Attach the plastic yoke to the bypass valve.
b. Connect the pipes to the 1” male NPT fit-
tings on the plastic yoke.
Bypass Valve
Plastic Yoke
Secure pipes to wall so that
their weight is fully supported.
Install a barb fitting into
the drain port (1/2” NPT).
a. Secure the piping to the wall or other
structure. The valve must not be used to
support the weight of the pipes.
b. Install a barb fitting in the drain port. Con-
nect a 1/2” ID hose to the barb fitting and
run it to the drain. Provide an airgap where
the drain line connects to the drain. Secure
the drain line connection.