Altech Auto Security AL7024S - Manual (Page 12)

AL7024S Quick Start Manual
No. AL7020S-QSM-101 Altec Electronic AG Seite 12 / 18
3.5 Security Commands
Command AT Manual pages Function
AT+CPIN
Enter PIN, p.247
This command is used to enter all types of
Passwords (CHV1/CHV2/PUK1/PUK2 etc.)
AT+CPIN?: Ask modem, which pin is required.
If none is required, response is “READY”,
If normal SIM-pin to switch on modem is
required,
the response is: “SIM PIN”
AT+CPIN=”1473” : Enter the SIM PIN 1473.
After entering this pin, Modem connects to the
network.
For use of other pins, see the “Developer’s
Guide”
AT+CLCK Facility lock, p.253
Lock, unlock and interrogate a modem or
network facility.
This command is very extensive, you can block
or allow all kinds of calls and modes. The
following example shows how to enable and
disable the SIM pin.
AT+CLCK=”SC”,0,”1473” :disable SIM pin
AT+CLCK=”SC”,1,”1473” :enable SIM pin
(with pin 1473)
AT+CPWD
Change password,
p.250
Change password
AT+CPWD=””,””,””
Example:
AT+CPWD=”SC”,”1473”,”5555” :change from
1473 to 55555