Altech Auto Security AL7024S - Manual (Page 11)

AL7024S Quick Start Manual
No. AL7020S-QSM-101 Altec Electronic AG Seite 11 / 18
3.4 Information Commands
Command AT Manual pages Function
AT&V
Display configuration,
p.291
Display the modem configuration.
(Actual configuration, profile 0, profile 1)
ATI
Request identification
information, p.51
Used to see various types of information
ATI3: Product title
ATI5: Software architecture
ATI7: product description
AT+CGMR
Request revision
identification, p.47 Display firmware revision number
AT+CGMM
Request model
identification, p.46 Display supported frequency bands
AT+CGSN Request IMEI-Nr. p.47
Display serial-number (IMEI-Nr.)
AT+GCAP Capabilities list, p.200
Get the list of capabilities
AT+CGCLASS
GPRS mobile station
class, p.297
Set the modem to a Class or return current
class
AT+CGCLASS? : returns current GPRS class
AT+CGCLASS=”CG”:set modem to GPRS only
mode
ATV
DCE response format,
p.257
Result codes as words or as numbers
ATV0: numbers
ATV1: words (default)
AT+CMEE
Report Mobile
Equipment errors, p.274
Select, if “ERROR” or Error with error-number
is displayed
AT+CMEE=0: disable Error reports (“ERROR”
displayed)
AT+CMEE=1: enable Error reports (Error-
number displayed)
AT+CEER
Extended Error Report,
p. 279
This command gives the reason of failure of the
last call-setup or answering-attempt.
AT+CR
Service reporting
control, p.110
Reports detailed type of data connection, if
enabled.
AT+CR=0: extended reports disabled
AT+CR=1: extended reports enabled
AT+CRC
Cellular result codes,
p.67
Gives more detailed ring information for
incoming call.
E.g. “+CRING:VOICE”
AT+CRC=0: disable extended reports
AT+CRC=1: enable extended reports