beautypg.com

Loading the laundry, 9 warning, Risk of explosion – Bosch WTB86200UC User Manual

Page 23: Check lint filter, Load the laundry into the drum and close the door, Tips, Starting the program, Notices, Loading the laundry starting the program

background image

23

Loading the laundry

9

WARNING

RISK OF EXPLOSION
Do not dry the laundry that has ever been in contact

with solvents, oil, wax, grease or paint (e.g. hair

styling products, nail varnish remover, stain

remover, cleaning solvent, etc.).

1.

Check lint filter.

The filter should be cleaned after or before every

drying process. Cleaning the filter reduces the drying

time and saves energy.
~ Cleaning the lint filter; Page 25

2.

Load the laundry into the drum and close the door.

Tip: If the door has not been closed properly, the dryer

will not start.

Tips
After loading, close the door carefully so as not to trap

any items between the door and the rubber seal. The

door should close until a click is heard.

Foreign objects left in the drum may damage laundry.

Before inserting any laundry, check to make sure no

foreign objects are in the drum.

Recommended Load Size
Recommended maximum load size can be found in the

program selection table in this manual.
~ Program selection table; Page 18

Load the laundry

Place laundry in the empty drum. Put each piece of

laundry into machine separately.
For best results the laundry to be dried must be sorted

according to type of laundry and desired degree of

drying.
~ Program selection table; Page 18

~ Sorting the laundry; Page 17

~ Dry Level; Page 19

Starting the program

1.

Rotate program selector to the desired program.

Select the program which corresponds to the laundry

in the dryer from Program selection table.
~ Program selection table; Page 18

The Start/Pause indicator light starts flashing.

2.

Press the Start/Pause button. Indicator lamp lights up

and the cycle starts.

During the cycle, the display area indicates the

estimated remaining time and, after starting the drying

cycle, the cycle duration and the symbols for the cycle

progress are flashing.
~ Display area; Page 17
NOTICES

If you want to protect the cycle against inadvertent

adjustment, select the Childproof lock.

~ Childproof lock; Page 24

If Cleaning req. indicator lights up, clean the lint

filter and/or heat exchanger.
~ Cleaning the lint filter; Page 25

~ Cleaning the heat exchanger; Page 26

L