Power management, Timer, Stop+go – Electrolux EHH6332FOK User Manual

Page 8: Lock, The child safety device

POWER MANAGEMENT

The power management divides the power
between two cooking zones in a pair (see
the illustration). The power function increa-
ses the power to the maximum level for
one cooking zone in the pair. The power in
the second cooking zone automatically de-
creases. The heat setting display for the re-
duced zone changes between two levels.

TIMER

Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
• To set the cooking zone:touch

again and again until the indicator of a
necessary cooking zone comes on.

• To activate or change the Timer:

touch

or of the timer to set the

time (

minutes). When the indi-

cator of the cooking zone starts to flash
slow, the time counts down.

• To deactivate the Timer: set the cook-

ing zone with

and touch to deacti-

vate the Timer. The remaining time
counts back to

. The indicator of the

cooking zone goes out.

• To see the remaining time: set the

cooking zone with

. The indicator of

the cooking zone starts to flash quickly.
The display shows the remaining time.

When the time comes to an end, the sound
operates and

flashes. The cooking

zone deactivates.
• To stop the sound: touch

You can use the Timer as a minute mind-
er while the cooking zones do not operate.
Touch

. Touch

to set the time.

When the time comes to an end, the sound
operates and

flashes

• To stop the sound: touch

STOP+GO

The

function sets all cooking zones that

operate to the lowest heat setting (

When

operates, you cannot change the

heat setting.
The

function does not stop the timer

function.
• To activate this function touch

. The

symbol

comes on.

• To deactivate this function touch

The heat setting that you set before
comes on.

LOCK

When the cooking zones operate, you can
lock the control panel, but not

. It pre-

vents an accidental change of the heat set-
ting.
First set the heat setting.
To start this function touch

. The sym-

bol

comes on for 4 seconds.

The Timer stays on.
To stop this function touch

. The heat

setting that you set before comes on.
When you stop the appliance, you also
stop this function.

THE CHILD SAFETY DEVICE

This function prevents an accidental opera-
tion of the appliance.

To activate the child safety device
• Activate the appliance with

. Do not

set the heat settings.

• Touch for 4 seconds. The symbol

comes on.

• Deactivate the appliance with

To deactivate the child safety device
• Activate the appliance with

. Do not

set the heat settings. Touch

for 4

seconds. The symbol

comes on.

• Deactivate the appliance with

www.electrolux.com