Electrolux ZCS2100 - Manual (Page 16)

English
TROUBLESHOOTING AND CONSUMER INFORMATION
Troubleshooting
The vacuum cleaner does not start
1 Check that the cable is connected to the mains.
2 Check that the plug and cable are not damaged.
3 Check for a blown fuse.
The vacuum cleaner stops
1 C heck whether the dust bag, s-bag® is full. If so, replace it
with a new one.
2 Is the nozzle, tube or hose blocked?
3 Are the filters blocked?
Water has entered the vacuum cleaner
It will be necessary to replace the motor at an authorised
Electrolux service centre.
Damage to the motor caused by the penetration of water is
not covered by the warranty.
Consumer information
and sustainability policy
Electrolux declines all responsibility for all damages arising
from any improper use of the appliance or in cases of
tampering with the appliance. For more details of warranty
and consumers’ contacts see the Warranty Booklet in the
packaging If you have any comments on the cleaner or the
Operating Instructions manual please e-mail us at
[email protected]
Sustainability policy
This product is designed with the environment in mind. All
plastic parts are marked for recycling purposes.
For details see our website: www.electrolux.com
The packaging material is chosen to be environmentally
friendly and can be recycled.