Reliability and performance, Ieee 802.1p and 802.1q – Avaya 1600 User Manual
Page 25
Other Network Considerations
Issue 1 June 2007
25
Reliability and Performance
All 1600 Series IP Telephones respond to a ping or traceroute message sent from the
DEFINITY
®
, MultiVantage™, Avaya Communication Manager, or Avaya Distributed Office
system or any other network source. The telephones do not originate a ping or traceroute. The
1600 Series IP Telephones offer and support “remote ping” and “remote traceroute.” The switch
can instruct the telephone to originate a ping or a traceroute to a specified IP address. The
telephone carries out that instruction and sends a message to the switch indicating the results.
For more information, see your switch administration documentation.
If applicable, the telephones test whether the network Ethernet switch port supports IEEE
802.1P/Q tagged frames by ARPing the router with a tagged frame. For more information, see
VLAN Considerations
on page 67. If your LAN environment includes Virtual LANs (VLANs),
your router must respond to ARPs for VLAN tagging to work properly.
QoS
For more information about the extent to which your network can support any or all of the QoS
initiatives, see your LAN equipment documentation. See
QoS
on page 33 about QoS
implications for the 1600 Series IP Telephones.
All 1600 Series IP Telephones provide some detail about network audio quality. For more
information see,
Network Audio Quality Display on 1600 Series IP Telephones
on page 26.
IEEE 802.1P and 802.1Q
For more information about IEEE 802.1P and IEEE 802.1Q and the 1600 Series IP Telephones,
see
IEEE 802.1P and 802.1Q
on page 33 and
VLAN Considerations
on page 67. Three bits of
the 802.1Q tag are reserved for identifying packet priority to allow any one of eight priorities to
be assigned to a specific packet.
●
7: Network management traffic
●
6: Voice traffic with less than 10ms latency
●
5: Voice traffic with less than 100ms latency
●
4: “Controlled-load” traffic for critical data applications
●
3: Traffic meriting “extra-effort” by the network for prompt delivery, for example, executive
●
2: Reserved for future use
●
0: The default priority for traffic meriting the “best-effort” for prompt delivery of the network.
●
1: Background traffic such as bulk data transfers and backups
Note:
Note:
Priority 0 is a higher priority than Priority 1.