Electrolux EIDW5905JS - Manual (Page 4)

4 Feature Overview
HOW YOUR DISHWASHER CLEANS
Your dishwasher fills with a small amount of water
(just covers the filter area at the bottom), sprays
that water on to the dishware to remove soils,
captures the soils in its filtration system and then
uses that water to flush the captured soils down the
drain. When more soils are present more iterations
of the fill/spray/filter/flush are applied. When
appropriate, detergent, heat and /or rinse agent are
also aplied to the spray water at the optimal times
within the cycle. The applied cycle (number of fills, spray pressure,
water temperature, addition of detergent, addition
of rinse agent, and amount of heat for drying) is set
by a combination of your cycle and option
selections and many automated decisions
programmed into your dishwasher. Your input sets
the temperature targets but the dishwasher will
automatically adjust heat input to account for the
actual heat loss, thermal capacity of the dish load,
and temperature of the incoming water. The
dishwasher also has the capacity to measure the
soil load and to shorten or lengthen the cycle to
apply the optimal response.
Silverware
Basket (Lids
may vary in
some models)
Adjustable Rack
Assembly
Serial Label
Upper Spray Arm
Cabinet Seal
Side Kit
(Not Shown In Image)
Lower Spray
A r m
Rinse Aid
Dispenser
Soap Dispenser
Bottom Rack
Top Rack
Middle Spray
A r m
Cup Shelf