beautypg.com

Care and cleaning, The oven door with luxury- hold™ hinges, Important – Electrolux EW30ES65GS User Manual

Page 49

background image

49

Care and Cleaning

1. Fully open the oven door.
2. Unlock both oven door hinge locks by pulling

them up and away from the oven frame until

they stop (unlocked position) -fig. 2-. If needed

use a small flat-bladed screwdriver to assist

with loosening the door hinge locks.

3. Firmly grasp both sides of oven door -fig. 3-.
4. Before completing this step, be prepared

to hold the whole weight of the door while

grasping the sides of the oven door with both

hands. Hold midway down the oven door sides.

Close the oven door to about 4 inches and

continue closing beyond the door stop position.

The oven door should release from the frame

on its own. -fig. 3-.

5. Carefully lift door away evenly, slightly up and

out until both hinge arms are clear of the hinge

slots in the oven frame -fig. 3-. After door has

been removed, be sure to lay the door flat with

the inside of the door downward (never rest the

oven door with any weight on the door handle).

The oven door with Luxury-

Hold™ hinges

Fig. 1 -

Lock in normal position

Fig. 2 -

Lock engaged for door removal

Fig. 3 -

HINGE SLOT - Door

removed from the appliance

To prevent possible burns, do not attempt

to remove the oven door until the oven has

completely cooled.

To avoid possible injury to hands when

removing or replacing the oven door, follow

the instructions below carefully and always

hold the oven door with hands positioned

away from the door hinge area (See Fig. 3).

IMPORTANT

The oven door is heavy. Be careful when

removing and lifting the door. Do not lift the

oven door by the handle.

To replace the Lift-Off oven door

To remove the Lift-Off oven door

1. Firmly grasp the oven door along both sides

just below the door handle. When positioning

the door hinge arms with the door hinge slots in

the oven frame, you may wish to use your knee

to stabilize the door before attempting to insert

the door hinge arms in the hinge slots.

2. Position the angle of the door to the door

removal angle and carefully insert the door

hinge arms fully and evenly into the door

hinge slots. Carefully let the weight of the door

transfer from your hands so that the oven now

supports the oven door.

3. Open the oven door down to the fully open

position.

4. With the door in the fully open position, push

both oven door hinge locks toward the oven

frame until they both are locked.

5. Close the oven door.