Electrolux EW30ES65GS - Manual (Page 38)

38 Setting Oven Controls
Sabbath mode
The ovens of this appliance provides special
settings for use when observing the Jewish
Sabbath/Holidays. This mode will turn off all
audible tones or visual display changes normally
provided by the oven control. BAKE is the only
cooking features available while in the Sabbath
mode.
You must first set the BAKE feature and
temperature(s) needed for the oven, the COOK
TIME option if needed before setting the Sabbath
mode. Any settings made prior to setting the
Sabbath mode will be visible in the displays.
The Sabbath mode will override the factory preset
12 Hour Energy Saving mode and the appliance
will stay on until the cooking features are cancelled.
If any of the cooking features are cancelled when
the appliance is in the Sabbath mode, no audible
or visual indicators will be available to verify the
cancellation.
If the oven interior lights are needed, be sure to
activate them prior to setting the Sabbath mode.
Once the oven light is turned ON and the Sabbath
mode is active, the oven light will remain on until
the Sabbath mode is turned off and the oven lights
are turned off. The oven door will not activate the
oven interior lights when the oven door is opened
or closed.
Should a power failure or interruption occur during
the Sabbath/Holidays, the appliance will shut OFF.
When power is restored the appliance will not turn
back on automatically to the original BAKE feature
settings. SF will appear in all the control display
panels indicating a Sabbath mode failure. - figs. 1-
For further assistance, guidelines for
proper usage and a complete list of
models with the Sabbath feature, please
visit the web at http:\\www.star-k.org.
Fig. 1
After a power failure, the food may be safely
removed from the oven while still in the Sabbath
mode.
Notes for the use of the cooktop in Sabbath
mode:
• When the Sabbath feature is enabled on
the oven control, it is also enabled on the
cooktop. To activate the Sabbath feature, it is
not necessary to have one burner ON, but it is
necessary to have a Bake function active in the
oven.
• When the Sabbath feature is enabled, a surface
element can be turned ON by pressing the ON/
OFF pad. The element will turn ON 15 to 30
seconds after the ON/OFF pad was pressed.
Once a surface element is on, its display shows
" Sb".
• When the Sabbath feature is enabled, the power
level of an active element can be changed. The
change will take effect after a 15 to 30 seconds
delay. The element size (inner/outer) CANNOT
be changed.