Electrolux EW30ES65GS - Manual (Page 11)

11
Rack positions
This oven is equipped with ladder rack supports with
8 positions to accommodate precisely every mode of
cooking.
* The first rack position can only accommodate a “non-
sliding rack”.
*
Oven vents location
Oven rack position
Installing oven rack supports
AlwAys instAll oven rACk sUpport before
tUrninG on the oven (when the oven is
Cool).
To install oven rack support, insert the supports by
pushing them downward into the two brackets on each
side of the oven interior, as shown below.
To remove the oven rack support for a self-clean
cycle, pull up the support to disengage them from
the brackets. If the rack supports are not removed,
the self-clean cycle won’t start.
The oven is vented above each door. When the oven
is on, warm air is released through the vents. This
venting is necessary for proper air circulation in the
oven and good baking results.
Oven vent
Warm Air
1
2
3
4
5
6
7
8
Features