Canon LV-8320 - Manual (Page 39)

ENGLISH
Setting up the projector
Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Aspect setting] or [Setting] and then set up each set-
ting.
Setting up the projector
Item Description
Aspect ..................... Switches the aspect mode. (Normal, Full,
16:9, Zoom, True, Natural wide, Custom)
There may not be available mode
depending on the input mode as shown
in the table below.
Ceiling ..................... Sets the image top/bottom and left/
right reversed. (ON, OFF)
Rear ........................... Sets the image left/right reversed. (ON,
OFF)
Screen aspect .... Sets the aspect. {Default(16:10), 16:9, 4:3}
Reset......................... Resets the Screen settings.
Aspect setting
This function is to adjust the aspect mode of the projector. The values in the text box rep-
resent the current aspect status.
Screen Aspect Default(16:10) 16:9 4:3
Input source Input source Input source
Aspect mode Video PC Video PC Video PC
Normal 4 4 4 4 4 4
Full 4 4 4 4 4 4
16:9 4 4 *1 *1 4 4
Zoom 4 4 4 4 4 4
True *1 4 *1 4 *1 4
Natural wide *2 *1 *2 *1 *1 *1
Custom 4 4 4 4 4 4
✐ The mark "
4
" means that
the available aspect mode
in the selected input
source system.
*1 The error message appears
when selecting the dis-
abled aspect mode indi-
cated with "*1".
*2 Natural wide cannot be
selected when 720p, 1035i,
1080i or 1080p is selected
in AV system menu.