Canon DP-V3010 - Manual (Page 8)

8
 3D-LUT: When using a DaVinci Resolve or Pablo 3D-LUT
The method of applying a 3D-LUT, exported by Blackmagic Design’s DaVinci Resolve or Quantel’s
Pablo, to a display is described below.
The example below shows the case when converting DCI color space to ITU-R BT.709 color space.
• DCI (input color space): Color gamut = DCI, color temperature = DCI, gamma = 2.6
• ITU-R BT.709 (output color space): Color gamut = ITU-R BT.709, color temperature = D65,
gamma = 2.2
① Export the DaVinci Resolve or Pablo 3D-LUT.
• Refer to the DaVinci Resolve or Pablo Instruction manual for the export method.
② Change the file extension of the output file to “.clut”. (Example: ***.cube / ***.txt → ***.clut)
③ Comment out all locations other than the actual LUT data in the output file.
• Add “#” to the start.
(Example) When using DaVinci Resolve
(Example) When using Pablo
#max value 1023
#vertices 17
#blue is fastest changing
#red is slowest changing
#cube data
# R G B
0 0 0
0 0 256
・・・ ・・・ ・・・
#TITLE "Generate by Resolve"
#LUT_3D_SIZE 17
0.00000000 0.00000000 0.00000000
0.12876712 0.03652968 0.01917808
・・・ ・・・ ・・・
Comment out
Comment out
COP
Y