ADC UltraWave X40 - Manual (Page 2)

Website: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
106410AE 6/08 Original © 2008 ADC Telecommunications, Inc. All Rights Reserved
Spec
Sheet
Specifications
Interface Capacity: 900 Erlangs @ 0.1% GoS and 25 mErlang per subscriber 1
Busy Hour Call Attempts: 80,000 total
E1 Ports: 64 (32 + 32)
Trunk Groups: 256
KEy MSC FEATuRES
HLR Capacity:
40,000
VLR Capacity: 40,000
SS7 LinkSets: 32
Redundancy: Traffic load sharing route redundancy
InTERFACES
BSC Link:
GSM Compliant A Interface; GSM Spec. 04.08, 08.08; ANSI 1992
CCITT 1988, 1992; BSSMAP, GSM 08.08 DTAP, GSM 04.07, 04.08,
SCCP & MTP GSM spec 08.06
PSTn: ITU ISUP, ITU ISDN PRI, R2 MFC 2 , CAMEL Phase II/III
Operations and Maintenance Link: Ethernet; SNMP based
Transmission:
Eight Port G7.03 compliant E1 75/120 Ohm; eight compliant T1 100 Ohm
Ethernet: 10/100 Mbps Ethernet, RJ-45 connector
POwER SuPPLy
Input Voltage:
-48 VDC
Power Consumption: 85 Watts (32 + 32 ports)
MECHAnICAL
Rack Mount:
19" rack mounted; cabinet optional
Dimensions (wxDxH): 48.3 x 35.5 x 26.7 cm (19 x 14 x 10.5 inches)
weight: 16.7 kg (37 lbs)
OPERATInG EnVIROnMEnT
Temperature:
10° to 45° C (50° to 113° F)
Humidity (non-condensing): 40% to 80%
Notes: 1. Grade of Service at trunk interface 2. With protocol converter
Product Highlights:
Call forwarding (conditional, unconditional), •
call waiting, call hold, call transfer
Calling party based routing, intelligent •
call routing
Caller ID, CLIR/CLIP •
E.164 support •
Call intercept •
Dual processor redundancy •
DTMF tones •
Generates GSM & CAMEL compliant •
CDR records
MAP-C, MAP-D, MAP-E •
GTT translations, STP functionality •
Support for SMS (MT/MO) •
Implicit IMSI detach and VLR purge •
GPRS support (Gr over SS7) •
Optional built-in IN prepaid functions •
(CAMEL based SSF)
Optional built-in SMSC, AuC •
and EIR functions
Optional voicemail and external short message •
entity platforms