Albatron Technology PX845PEV-800 - Manual (Page 30)

Albatron Anniversary Special Edition PX845PEV-800
27
CPU L1 & L2 Cache
Make CPU internal cache active or inactive. System performance may degrade if you disable
this item. Options: Enabled (default), Disable.
Quick Power On Self Test
Allow the system to skip certain tests while booting. This will speed up the boot process.
Options: Enabled (default), Disabled.
Swap Floppy Drive
If the system has two floppy drives, choose “Enabled” to assign physical drive B to logical
drive A and vice-versa. Options: Disabled (default), Enabled.
Boot Up NumLock Status
Selects the power on state for NumLock.
Options: On (default) Numpad keys are number keys.
Off Numpad keys are arrow keys.
Typematic Rate Setting
When “Enabled”, the “typematic rate” and “typematic delay” can be configured. Typematic
Rate determines the keystroke repeat rate used by the keyboard controller.
Options: Disabled (default), Enabled.
Typematic Rate (Chars/Sec)
The rate at which a character repeats when you hold down a key.
Options: 6 (default), 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
The delay before keystrokes begin to repeat. Options: 250 (default), 500, 750, 1000.
APIC Mode
By enabling this option, “MPS version control for OS” can be configured.
Options: Disabled, Enabled (default).
MPS Version Control For OS
The version 1.1 is an older version that supports 8 more IRQs in the Windows NT environment.
Choose the new version 1.4 for Windows 2000 and Windows XP. Options: 1.4 (default), 1.1
OS Select For DRAM > 64MB
Select “OS2” only if you are running the OS/2 operating system with greater than 64MB of
RAM. Options: Non-OS2 (default), OS2.
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to
attempt to predict the possible failure of storage drives. Options: Disabled (default), Enabled.
Small LOGO (EPA) Show
This item allows you to show or hide the small LOGO EPA. Options: Disabled (default),
Enabled.