Back panel configuration, Ps/2 mouse & ps/2 keyboard connectors: kb/ms, Usb & lan connectors: usb/lan – Albatron Technology PX845PEV-800 User Manual
Page 16
Albatron Anniversary Special Edition PX845PEV-800
13
Back Panel Configuration
PS/2 Mouse & PS/2 Keyboard Connectors: KB/MS
The Albatron PX845PEV-800 mainboard provides a standard PS/2 mouse connector and PS/2
Keyboard connector. The pin assignments are described below:
USB & LAN Connectors: USB/LAN
There are two USB connectors on Albatron PX845PEV-800 back panel. These OHCI (Open
Host Controller Interface) Universal Serial Bus connectors are used to attach to USB devices
such as: keyboards, mice and other USB devices. You can plug the USB devices directly into
this connector. Albatron PX845PEV-800 also provides two USB headers on the board
allowing for 4 more USB ports. These attach to USB connectors embedded into the computer
case or connected to a USB connector bracket. Albatron PX845PEV-800 also provides a LAN
port. You can plug LAN devices directly into this connector.
Pin Assignment Pin Assignment
1
MS Data
4
+5 V (fused)
2
No connect
5
MS Clock
3
Ground
6
No connect
Pin Assignment Pin Assignment
1
KB Data
4
+5 V (fused)
2
No connect
5
KB Clock
3
Ground
6
No connect
PS/2 Mouse
PS/2 Keyboard
Printer Port
PS/2 Mouse
PS/2 Keyboard
COM1
COM1
USB
LAN
COM2