Brother FAX-T106 - Manual (Page 7)

v
Quick Reference Guide
Sending faxes
Automatic transmission
1
Insert the document face
down in the ADF (up to 10
pages).
2
Enter the fax number you
want to call.
3
Press Fax Start.
Receiving faxes
Select Receive Mode
1
For FAX-T104, press
Receive Mode to select
FAX ONLY
, FAX/TEL,
TAD:ANSWER MACH. or
MANUAL .
For FAX-T106, press
Receive Mode to select
FAX ONLY
, FAX/TEL, or
MANUAL .
Press to select
TAD:MSG MGR .
If you select FAX/TEL,
make sure you set Ring
Delay and F/T Ring Time.
(See Setting the Ring
Delay on page 5-2 and
Setting the F/T Ring Time
(FAX/TEL mode only) on
page 5-3.)
Storing numbers
Storing One-Touch Dial
numbers
1
Press Menu/Set, 6, 1.
2
Press a One-Touch key
where you want to store a
number.
3
Enter a number (up to 20
digits), and then press
Menu/Set.
4
Enter a name up to 15
characters (or leave it
blank), and then press
Menu/Set.
5
Press
▲ or ▼ to select the
type of number and press
Menu/Set.
6
Press Stop/Exit.
Storing Speed-Dial numbers
1
Press Menu/Set, 6, 2.
2
Using the dial pad, enter a
two-digit Speed-Dial
location number (00-99),
and then press Menu/Set.
3
Enter a number (up to 20
digits), and then press
Menu/Set.
4
Enter a name (up to 15
characters) or leave it
blank, and then press
Menu/Set.
5
Press
▲ or ▼ to select the
type of number and press
Menu/Set.
6
Press Stop/Exit.
Dialling operations
One-Touch Dialling
1
Insert the document face
down in the ADF.
2
Press the One-Touch key
of the number you want to
call.
3
Press Fax Start.
Speed-Dialling
1
Insert the document face
down in the ADF.
2
Press Search/Mute, then
press # and the two-digit
Speed-Dial number.
3
Press Fax Start.