Brother FAX-T106 - Manual (Page 111)

Glossary
G - 3
Remote Access Code Your own four-digit code (--- ) that
allows you to call and access the fax machine from a remote
location.
Resolution The number of vertical and horizontal lines per inch.
See: Standard, Fine, Super Fine and Photo.
Ring Delay The number of rings before the fax machine answers
in FAX ONLY, FAX/TEL, and TAD:MSG MGR (FAX-T106 only)
mode.
Search An electronic, alphabetical listing of stored One-Touch,
Speed-Dial and Group numbers.
Speed-Dial A pre-programmed number for easy dialling. You
must press the Search/Mute key and then #, two digit code to
start the dialling process.
Standard resolution 203 x 98 dpi. It is used for regular size text
and quickest transmission.
Station ID The stored information that appears on the top of faxed
pages. It includes the sender’s name and fax number.
Super fine resolution 203 x 392 dpi. Best for very small print and
line art.
TAD (telephone answering device) You can connect an
external TAD to your fax machine.
Telephone Answer Code (Fax/Tel mode only) When the fax
machine answers a voice call, it pseudo/double-rings. You can
pick up at an extension phone by pressing this code (# 5 1).
Tel-Index List A listing of names and numbers stored in
One-Touch and Speed-Dial memory, in alphabetical order.
Tone A form of dialling on the telephone line used for Touch Tone
telephones.
Transmission The process of sending documents over the
phone lines from the fax machine to a receiving fax machine.
User Settings A printed report that shows the current settings of
the fax machine.
XMIT Report (Transmission Verification Report) A listing for
each transmission, that shows its date, time and number.