Brother CS-8150 - Manual (Page 121)

Sewing the Various Built-In Decorative Patterns 115
3
5
Check the sewn pattern.
If the part of the pattern indicated in the
illustration is sewn uniformly, the pattern is
correctly aligned.
If the pattern is not sewn correctly, following
the steps below to adjust the sewing.
6
Press (settings key) in the operation panel.
X The settings screen appears.
7
Press , , and (arrow keys) until
is selected.
8
Press (OK key).
X The screen for adjusting the pattern appears.
9
Press (–) or (+).
X Make the necessary adjustments according
to how the pattern is sewn.
Press to increase the adjustment setting.
Press to decrease the adjustment setting.
0
Start sewing again, and then check the
pattern.
Continue adjusting the pattern until it is sewn
correctly.
a
When the pattern is sewn correctly, press
(OK key).
X The initial stitch screen appears again.
S3_brotherE.book Page 115 Wednesday, February 12, 2003 11:49 AM