Brother Innov-is 6750D - Manual (Page 7)

5
E
NGLIS
H
Specifying the Functions
The functions performed by the multi-function foot
controller can be specified in the machine settings
screen.
a
Press , and then press or to
select the functions to be performed by the
multi-function foot controller.
Adjusting the Pedal Positions
The pedal spacing can be adjusted depending on the
screw holes used in the mounting plate. The pedal
spacing is the widest when the pedals are attached
using the outermost screw holes
a ; the pedal spacing is
the narrowest when they are attached using the
innermost screw holes
b .
Note
• After the multi-function foot controller is connected
to the sewing machine and the functions are
specified, the machine's “Start/Stop” button cannot
be used. All buttons other than the “Start/Stop”
button can continue to be used.
Note
• The side pedal may be attached on the right or left
side of the main foot controller.
• For greater distance you always have the option of
not connecting the side pedal and main foot
controller using the mounting plate, making sure that
both pedals are connected using the jack from the
side pedal to the main foot controller.