Brother HS-3000 - Manual (Page 66)

VARIOUS STITCHES —————————————————————————————————————————————————
64
SEWING CHARACTERS
(for models equipped with character stitches)
55 characters can be sewn by following the procedure below.
Selecting characters
■ Selecting a character
[Example] Selecting stitch “C” (No. 03).
a
Turn on the sewing machine.
b
Press the character stitch key and confirm that
the character stitch indicator lights up.
a Character stitch key
b Character stitch indicator
Memo
● When you select a character, check that
there are no characters in memory.
a This indicator shows that no character is stored.
If there are any characters in memory,
delete them. (For details, refer to “Deleting
characters” (page 66).)
c
Press (stitch selection keys) to select
pattern No. 03.
• For details, refer to step c of “Selecting a
stitch” (page 28).
d
Press the “+” side of (stitch width
adjustment key) to enter the selected
character.
a Stitch width adjustment key
X The following display is shown on the
LCD.
a Selected pattern No.
b The position of the selected pattern No.
c The total number of entered characters
e
Attach the presser foot indicated on the LCD.
a The presser foot to use
• For details, refer to “Replacing the presser
foot” (page 25).
f
If you would like to only sew this single
character, start sewing.
If you would like to sew a sequence of
characters, go to step
a a on “Combining
characters” (page 65).
• For details on sewing characters, refer to
“Sewing the character stitches” (page 67).
ABC
ABC
a
N
N