AEG DF 6260 - Manual (Page 15)

81
Installation
Preparing the wall unit - Extractor version
• The hood is supplied as an extractor unit.
Before installing the hood, drill a hole in the roof of the wall unit
(see item. 5). This hole is to allow passage of the outlet pipe and
the power cable, and to facilitate servicing.
• The wall unit must have a minimum body depth (without door) of
300 mm with recessed light screen and min. 370 mm with flush-
mounted light screen. The unobstructed internal height must be at
least 370 mm.
190
238
172
Fig. 5