Enabling wireless access mode (for computer), 6enabling wireless access mode (for computer) – Brother DS-820W User Manual

Page 58

Wi-Fi

Connection

Enabling Wireless Access Mode (for computer)

Enable Wireless Access Mode to view and download scanned documents from the scanner’s SD Card in your
web browser.

Ensure that your scanner has a fully charged battery.

Power ON the scanner.

Once the scanner is on, set the Wi-Fi

switch to ON.

When the scanner’s Wi-Fi

indicator changes from red to blue (it may take up to 40 seconds), your

scanner is Wi-Fi

access-enabled.

On your computer, click the

(Internet access) icon in the task tray. Your scanner’s SSID will appear

in the list of available wireless devices. The default SSID is Brother DS-820W-xxxx (Brother DS-920DW-
xxxx) (xxxx shows the last four digits of your scanner’s MAC address (twelve-digits). The address is
printed on your product label.). Click on it to select your scanner.

For example, in Windows

7, click the

icon in your task tray, and then select the scanner’s SSID. If

you cannot locate your machine’s SSID, contact your network administrator.

This manual is related to the following products:

DS-920DW