Brother PR-1000 - Manual (Page 30)

29
b
Select the pattern whose slide distance is to
be measured.
c
Continue to the embroidery settings screen,
and then press
to select the basting
function.
→
changes to .
d
After the pattern is sewn, remove the fabric
from the frame, and then measure the
distance that the pattern is to be slid.
a Vertical: 32.8 mm
b Horizontal: 42.8 mm
Trial Sewing
Sew trial embroidery to check that the pattern will be
slid the correct distance.
a
Select the pattern, and then continue to the
embroidery settings screen.
b
Press in the embroidery settings screen.
c
Embroider the first pattern.
d
Refer to steps
e
through
h
of “Practice
(Connecting Three Patterns)” to select the
next pattern.