beautypg.com

For wireless network users – Brother ADS-2500W User Manual

Page 27

background image

27

For Wireless Network Users

Wirele

ss Network

TS-07

The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled.

If you would like to configure your wireless settings using WPS or AOSS™, you must operate
both your machine and the wireless access point/router.
Confirm your wireless access point/router supports WPS or AOSS™ and try starting again.

If you do not know how to operate your wireless access point/router
using WPS or AOSS™ see the documentation provided with your
wireless access point/router, ask the manufacturer of your wireless
access point/router or ask your network administrator.

TS-08

Two or more wireless access points that have WPS or AOSS™ enabled are detected.

- Confirm that only one wireless access point/router within range has the WPS or AOSS™

method active and try again.

- Try starting again after a few minutes in order to avoid interference from other access

points.

Note

If the error code TS-20 appears, the machine is still trying to connect to your wireless network. Please wait a
few minutes, and then check the WLAN status from the control panel of the machine.