Brother ADS-2500W - Manual (Page 21)

21
For Wireless Network Users
Wirele
ss Network
i
Enter the Network Key you wrote down in
step
9-a on page 17, and then click Next.
j
Click Next. The settings will be sent to your
machine.
k
Disconnect the USB cable between the
computer and the machine.
l
Click Next to continue to install MFL-Pro Suite.
Wireless setup is now complete. A four
level indicator at the top of your
machine’s LCD will show the wireless
signal strength of your access
point/router.
To install MFL-Pro Suite
For Windows
®
users:
Now go to
Step 12-e on page 29
For Macintosh users:
Now go to
Step 12-d on page 31
Note
If your network is not configured for
Authentication and Encryption, the following
screen will appear. To continue configuration,
click OK and go to
j.
Note
• The settings will remain unchanged if you click
Cancel.
• If you want to manually enter the IP address
settings of your machine, click Change IP
Address and enter the necessary IP address
settings for your network.
• If the wireless setup failure screen appears,
click Retry and try starting from step h again.