Configure wireless access mode for bol services – Brother DS-820W User Manual
Page 8
Introduction
1
How to create an account for each of the desired services
In order to use BR-Docs, you must have an account. If you do not have an account, use a computer to
access the Brother Online website and create an account.
If you already have an account, there is no need to create an additional account.
Continue with the next step, Configure Wireless Access Mode for BOL Services on page 5.
Configure Wireless Access Mode for BOL Services
When your scanner is in Wireless Access Mode, you can configure it to access Brother Online (BOL)
services, including BR-Docs.
a
Once the scanner is on, set the Wi-Fi
®
switch to
ON.
b
When the scanner’s Wi-Fi
®
indicator changes from red to blue (it may take up to 40 seconds), your
scanner is Wi-Fi
®
access-enabled.
c
On your computer, click the
(Internet access) icon in the task tray. Your scanner’s SSID will appear
in the list of available wireless devices. The default SSID is
Brother DS-820W-xxxx (Brother DS-920DW-
xxxx) (xxxx shows the last four digits of your scanner's MAC address (twelve-digits). This MAC
address is printed on the scanner label, located on the bottom of your scanner.
Click the SSID to select your scanner.
For example, in Windows
®
7, click the
icon in your task tray, and then select your scanner’s SSID.
If you cannot locate your machine’s SSID, contact your network administrator.
5