Brother CM550DX - Manual (Page 8)

8
After drawing the quilting lines, overlap the backing
fabric, quilt batting and top (patchwork), in order,
and then baste them together.
1
Prepare quilt batting and backing fabric 3 to 4
cm (1-3/16 to 1-9/16 inches) larger than the
top, overlap the three layers, and then secure
them with pins.
1 Wrong side of fabric
2 Quilt batting
3 Top
4 Pin
2
From the center to the outside, baste a grid
pattern in the order shown in the illustration.
At the beginning of stitching, make a thread
knot. At the end of stitching, sew a backstitch,
and then cut the thread.
1 Beginning of stitching
2 Backstitch
* When quilting small items, basting pins can
also be used.
6 Basting
(1)
(2)
(3) (4)
(5)
(6)
(7)
(8)
(9)
(11)
(10)
(12)