Brother CM550DX - Manual (Page 11)

11
4
In the same way, sew all along the edges and
return to the folded back end of the bias tape.
Cut off any excess bias tape.
1 Overlap the fold.
2 Excess bias tape
5
Turn the quilt over, cover the seam allowance
with the bias tape, and then finish it with
blindstitching.
The corner will be mitered as shown in the
illustration.
Memo
● Binding sewn with a sewing machine will
be securely attached.
With binding sewn by hand, secure with a
half-backstitch.
1 Wrong side of fabric
2 Fold in three
3 Right side of bias tape
1 Wrong side of fabric
2 Blindstitch
3 Fold in three
1 Wrong side of fabric
2 Mitered
3 Blindstitch
3
1 Mitered
2 Right side of quilt