Brother CP-7500 - Manual (Page 37)

35
1
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
b
Hold the presser foot holder in place with
your right hand, and then tighten the screw
using the disc-shaped screwdriver in your left
hand.
a Disc-shaped screwdriver
b Presser foot holder
c Presser foot holder screw
Note
● If the presser foot holder is not correctly
installed, the thread tension will be
incorrect.
● Be sure to securely tighten the presser foot
holder screw, otherwise the presser foot
holder may fall off and the needle may strike
it, causing the needle to bend or break.
CAUTION