Brother MFC-5860CN - Manual (Page 7)

Setting Up the Machine
5
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Gently put the paper into the paper tray print
side down and top edge first.
Check that the paper is flat in the tray.
Note
If you are using Legal size paper, press and hold
the universal guide release button (1) as you slide
out the front of the paper tray to match the paper
size you are using.
5
Gently adjust the paper side guides with both
hands to fit the paper.
Make sure that the paper side guides and
paper length guide touch the edges of the
paper.
Note
Be careful that you do not push the paper in too
far; it may lift at the back of the tray and cause feed
problems.
6
Close the output paper tray cover.
7
Slowly push the paper tray completely into the
machine.
1