5 connecting the power cord, 6 installing the ink cartridges, Step 1 – Brother MFC-5860CN User Manual
Page 10: Setting up the machine, 5connecting the power cord, 6installing the ink cartridges, No cartridge open ink cartridge, Warning
Setting Up the Machine
8
STEP 1
Note
If you are sharing one phone line with an external
telephone answering machine, connect it as
shown below.
Set the receive mode to ‘External TAD’ if you
have an external answering machine. For
details, see Connecting an external TAD
(telephone answering device) in Chapter 7 of
the User’s Guide.
5
Connecting the power cord
1
Connect the power cord.
6
Installing the ink cartridges
Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows:
No Cartridge
Open ink cartridge...
2
Open the ink cartridge cover (1).
3
Pull all the lock release levers down and
remove the yellow protective part (1).
Note
Do not throw away the yellow protective part. You
will need it if you transport the machine.
4
Take out the ink cartridge.
1
1