For mac os® x 10.2.4 or greater, For mac os, X 10.2.4 or greater – Brother MFC-8460N User Manual

Page 28: Step 2, Installing the drivers & software, For usb interface cable users

Make sure that you have finished the instructions from Step 1 “Setting Up
the machine” on pages 4 - 11.

Turn off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh

, if you already connected an

interface cable.

Turn on your Macintosh

Insert the supplied CD-ROM for Macintosh

into your CD-ROM drive.

Double-click the Start Here OSX icon to
install the drivers and MFL-Pro Suite. If the
language screen appears, choose your
language.

Click MFL-Pro Suite to install.

Follow the on-screen instructions, and
restart your Macintosh

After the DeviceSelector window appears,
connect the USB interface cable to your
Macintosh

and then to the machine.

For USB Interface Cable Users

For Mac OS

X 10.2.4 or greater

For Mac OS

X 10.2.0 to 10.2.3 user, upgrade

to Mac OS

X 10.2.4 or greater.

(For the latest information for Mac OS

X, visit

http://solutions.brother.com)

The DeviceSelector window will not appear if
you have connected a USB interface cable to
the machine before restarting your
Macintosh

or if you are overwriting a

previously installed version of the Brother
software. If you encounter this problem
continue with the installation but skip Step 9.
You should choose your Brother machine
from the Model pull-down list in the main
screen of ControlCenter2 (For details, see the
Software User’s Guide on CD-ROM).

Step 2

Installing the Drivers & Software

This manual is related to the following products:

MFC-8860DN