Brother MFC-8460N - Manual (Page 25)

23
.
■
Firewall settings on your PC may reject the
necessary network connection for Network
Scanning and PC-Fax.
Follow the instructions below to configure
your Windows Firewall. If you are using a
personal Firewall software, see the User's
Guide for your software or contact the
software manufacturer.
■
Windows
®
XP SP2 users:
1 Click the Start button, Control Panel
and then Windows Firewall.
Make sure that Windows Firewall on the
General tab is set to On.
2 Click the Advanced tab and Settings...
button.
3 Click the Add button.
4 To add port 54925 for network scanning,
enter the information below:
1) In Description of service: - Enter any
description, for example “Brother
Scanner” (without the inverted
commas).
2) In Name or IP address (for example
192.168.0.12) of the computer
hosting this service on your
network: - Enter “Localhost” (without
the inverted commas).
3) In External Port Number for this
service: - Enter “54925” (without the
inverted commas).
4) In Internal Port number for this
service: - Enter “54925” (without the
inverted commas).
5) Make sure UDP is selected.
6) Click OK.
1
2
3
4
5
5 Click the Add button.
6 To add port 54926 for Network PC-Fax,
enter the information below:
1) In Description of service: - Enter any
description, for example “Brother
PC-Fax” (without the inverted
commas).
2) In Name or IP address (for example
192.168.0.12) of the computer
hosting this service on your
network: - Enter “Localhost” (without
the inverted commas).
3) In External Port Number for this
service: - Enter “54926” (without the
inverted commas).
4) In Internal Port number for this
service: - Enter “54926” (without the
inverted commas).
5) Make sure UDP is selected.
6) Click OK.
7 If you still have trouble with your network
connection, click the Add button.
8 To add port 137 for both network
scanning and Network PC-Fax receiving,
enter the information below:
1) In Description of service: - Enter any
description, for example “Brother
PC-Fax Receiving” (without the
inverted commas).
2) In Name or IP address (for example
192.168.0.12) of the computer
hosting this service on your
network: - Enter “Localhost” (without
the inverted commas).
3) In External Port Number for this
service: - Enter “137” (without the
inverted commas).
4) In Internal Port number for this
service: - Enter “137” (without the
inverted commas).
5) Make sure UDP is selected.
6) Click OK.
9 Make sure if the new settings are added
and are checked, and then click OK.
■
For Network installations, the Repair
MFL-Pro Suite selection from the main
menu is not supported.
■
Network Scanning, Network Remote Setup,
Network PC-FAX Receiving are not
supported in Windows NT
®
4.0.
■ For configuration of advanced network
functions such as LDAP, Scan to FTP and
Fax to Server, see the Software and
Network User’s Guides located on the
CD-ROM.
Installing the Dr
ivers &
Software
W
ind
ows
®
Network
Setting Up
the machin
e
Network
Administrators