Brother ADS-1500W - Manual (Page 5)

5
Windows
® USB
Windows
®
Macintosh
USB
6
Connect the USB cable
a
Connect the USB cable to the USB port
marked with a
symbol on the back of your
machine. Connect the other end of the cable to
your computer.
b
The installation will continue automatically.
The installation screens appear one after
another.
c
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
7
Finish and restart
a
Click Finish to restart your computer.
b
The following screens will appear:
• When the Software Update Setting screen
appears, choose the software update setting
you want and click OK.
• When the Brother Product Research and
Support Program screen appears, select
your preference and follow the on-screen
instructions.
To install optional applications:
Now go to
Page 16
NOTE
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
NOTE
• If an error message appears during the
software installation, do one of the following:
- Windows
®
XP, Windows Vista
®
and
Windows ® 7 users: Run the Installation
Diagnostics located in (Start) >
All Programs > Brother > ADS-XXXXX
(where XXXXX is your model name).
- Windows ® 8 users: To run the Installation
Diagnostics, double-click (Brother
Utilities) on the desktop, and then click the
drop-down list and select your model name
(if not already selected). Click Tools in the
left navigation bar.
• Depending on your security settings, a
Windows
®
Security or antivirus software
window may appear when using the machine
or its software. Please allow or permit the
window to continue.
NOTE
Internet access is required for the software
update and the Brother Product Research and
Support Program.
Finish
The installation is now
complete and it is time to
do a test scan. See Test
Scan (scan to PDF) on
page 18.