Brother ADS-1500W - Manual (Page 6)

6
Macintosh
USB
For Macintosh USB interface users
(Mac OS X v10.6.8/10.7.x/10.8.x)
4
Before you install
Make sure your machine is connected to the power
and your Macintosh is ON.
5
Connect the USB cable
a
Connect the USB cable to the USB port
marked with a
symbol on the back of your
machine. Connect the other end of the cable to
your computer.
6
Install MFL-Pro Suite
a
Put the DVD-ROM into your DVD-ROM drive.
b
Double-click the Start Here OSX icon to install.
If the model name screen appears, choose
your machine.
c
Choose Local Connection (USB), and then
click Next. Follow the on-screen instructions.
d
After the installation, the Brother software will
search for the Brother device. This will take a
few moments to complete.
e
Choose your machine from the list, and then
click Next.
To install optional applications:
Now go to
Page 17
NOTE
For Mac OS X v10.6.0 to 10.6.7 users, upgrade to
Mac OS X v10.6.8 - 10.8.x.
NOTE
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
• Connect the machine directly to your
Macintosh.
Finish
The installation is now
complete and it is time to
do a test scan. See Test
Scan (scan to PDF) on
page 18.