AT&T 9371 - Manual (Page 19)

HEADLINE LEFT
HEADLINE L-SUB
16
You can store 10 telephone numbers (up to 16 digits each) in the base
memory locations (0-9).
Store a Number in Base Memory
1 Press p on the base to enter programming mode.
The SPEAKER light flashes.
2 Press
M.
3 Press the dial pad key (0-9) for the location where you want
to store the number.
4 Enter the telephone number.
4 Press p to store the number. You will hear a confirmation
tone.
Dial a Number in Base Memory
1 Press
K.
2 Press
M and then the memory location (0-9) of the number
you want to dial. The number is dialed automatically.
TELEPHONE MEMORY
AT THE BASE
9371_book_1ATT 8/14/01 10:00 AM Page 16