AT&T 9371 - Manual (Page 17)

14
TELEPHONE MEMORY
AT THE HANDSET
4 When you finish entering the name, press
s. The screen
displays ENTER NUMBER.
5 Enter the telephone number. Use
< to backspace and make
a correction. Press
r to store a pause in the dialing
sequence.
6 Press
s or p to store your entry. You’ll hear a series
of beeps confirming the entry.
Note: When memory is full the screen displays MEMORY FULL, an error
tone sounds, and you will not be able to store a new number until you
delete a stored number.
Edit a Number Stored in the Directory
1 Press
> (DIR). The screen displays DIRECTORY.
2 Press
< or > to scroll alphabetically through numbers
stored in the directory
—OR—
Press the dial pad key for the first letter of the entry you
want to edit.
3 When the screen displays the number you want to edit, press
s.
Then press
> until EDIT flashes.
4 Press
s. The screen displays the name and number. The flashing
cursor appears at the end of the name. Use
<, > and the dial
pad keys to edit the name. Press
s to move on to edit the
number.
5 Press
s to save the edited information. You’ll hear a series of
beeps confirming the change.
DIAL E ED DI IT T ERASE
9735550123
9371_book_1ATT 8/14/01 10:00 AM Page 14