Autostart AS-6205 - Manual (Page 7)

P. 7 User Guide AS-6205 SH
Shock Delete
The shock sensor can be temporarily disabled. To temporarily disable shock and
warn-away sense:
x
Press the TRUNK button and, within 3 seconds,
x Press the STOP button.
Shock senses will now be ignored until the next disarming of the system.
User-selectable Options
The system was designed with flexibility and OEM integration in mind. With its
programmable options, this unit can single-handedly control nearly any electrical system
in your vehicle.
Note : The programming of your system should be left to a professional. Changing any one of
the settings may affect the operation of your system.
The user-selectable options are as follows:
x Safe Start
x Remote Door Locks
x Passive or Active Arming
x Disarm Notification
x Shock Sense and Warn-Away
Sense
x Siren Chirps
x Ignition-Controlled Door Locks
x Ignition Re-Lock
x Secure Lock
x Remote Trunk Release
x Starter Kill
x Engine Run Time
x Multi-Car Operation
Safe Start
Safety feature: Safe Start features will prevent accidental remote starts.
If this feature is enabled, the user must press the START button 2 times within 3 seconds
to remote-start the vehicle.
If Swap Start Mode has been configured by your installer, to remote-start your vehicle
press
LOCK and UNLOCK simultaneously. (Press Start to trigger the AUX 2 output.)
Safe Start features will eliminate accidental remote starts, e.g. when there are children
playing with the transmitter.
Remote Door Locks
If your system was installed with the Remote Door Locks option, you will have the
convenience of remote keyless entry.
To
UNLOCK your doors and DISARM the system:
1. Press and hold the UNLOCK button for approx. 1 sec.
2. The parking lights will flash twice and the LED will go out to confirm that the doors
have been unlocked, that the Starter Kill feature is disarmed (if it was installed) and
that the Alarm is disabled.
To
LOCK
your doors and
ARM
the system:
1. Press and hold the
LOCK
button for approx. 1 sec.
2. The parking lights will flash once and the LED will flash slowly to confirm that the
doors have been locked, that the Starter Kill feature is enabled (if it was installed)
and that the Alarm is armed.