Ameriphone RC-100 - Manual (Page 13)

11
Voice Activated answering Unanswered call indicator is Voice Mail indicator is off,
is off, (RC-200 only). on. (RC-200).
Ring volume set to Hi. ”0“ (operator) is programmed into Remote Flash switch is off,
the first memory location of M1. (RC-200 only).
Press 0 on the keypad to Press SCAN button.
turn it off; or Press 1 key on
the keypad to turn it on.
Press 0 key to turn it off; or
Press SCAN button.
Press 1-9 keys to turn it on. See
Page 5 for rate selection guide.
Press MUTE twice.
Press HEADSET twice.
Press FLASH/PAUSE twice.
Dial the number (up to Select the memory button. Press once for first location, or
40 digits). twice for second location.
Dial the number. Press ON/OFF button to hang up.
The number is dialed in
7 seconds.
When the desired directory Press Remote Transmitter to hang up.
location is lit, press it again.
The first number stored
Press Remote Transmitter once to
under M1 is dialed. hang up.
Press ON/OFF button to hang up.
Press Remote Transmitter once to hang up.
It hangs up automatically after one minute of silence or when it detects dial tone.
2
2
2
2
2
2
2 3
3
3
3
3
3
2
2
2
2
2
2
•
• •
• •
•