Ameriphone RC-100 - Manual (Page 12)

FACTORY PRESET MODES OF OPERATION:
Scan rate = 5 seconds per memory
location.
Tone/pulse switch set to Tone.
TO CHANGE MODES OF OPERATION
Setting the Scan Function
If you have DIALOGUE RC-100 Press PROGRAM.
To turn Scan function off (or on):
If you have DIALOGUE RC-200 Press PROGRAM.
To turn Scan function off (or on):
To turn Voice Activation on (or off), Press PROGRAM.
(RC-200 only):
To turn the Unanswered Call
Press PROGRAM.
Indicator feature off (or on):
To turn the Voice Mail Indicator
Press PROGRAM.
feature on (on off), (RC-200 only):
PROGRAMMING NUMBERS INTO MEMORY
Press PROGRAM.
MAKING A CALL BY DIALING ON THE RC
A. From the keypad Press ON/OFF button.
B. Auto Dialing the first number stored in M1 Press ON/OFF button.
C. Memory Dialing Press a memory button once to dial the first
stored number, twice for the second number.
MAKING A CALL USING THE REMOTE TRANSMITTER
A. With Scan function on Press Remote Transmitter once.
B. With Scan function off Press Remote Transmitter once.
ANSWERING A CALL
A. From the keypad Press ON/OFF button to answer.
B. Using the Remote Transmitter Press Remote Transmitter once to answer.
C. Using Voice Activation, Say “Hello” or whistle between rings
( DIALOGUE RC-200 only). to turn on phone.
10
QUICK START GUIDE/
SUMMARY
For more detailed description see Chapter 5.
OPERATION STEPS
1
1
1
1
1
1
1
1
1
1
1
1
1
1
•
•