Transmille EA001A - Manual (Page 8)

EA001A THERMOCOUPLE SIMULATION & MEASUREMENT ADAPTER
OPERATION MANUAL
Transmille Ltd. Page 8
Using The Thermocouple Simulation Function
To use the thermocouple simulation function, press the key and select the following :
Connecting the UUT
Connect the EA001A to the adapter interface on the calibrator front panel using the
supplied connection lead. Connect the Unit Under Test (UUT) to the connector
marked Output to Temperature Meter (fixed cable).
The thermocouple simulation option allows the user to enter a temperature in °C and set
the calibrator to the specific voltage output which corresponds to the thermocouple type
selected.