Transmille EA001A - Manual (Page 12)

EA001A THERMOCOUPLE SIMULATION & MEASUREMENT ADAPTER
OPERATION MANUAL
Transmille Ltd. Page 12
Connect the EA001A to the adapter interface on the calibrator front panel using the
supplied connection lead. Connect the Unit Under Test (UUT) to the connector
marked Input From Thermocouple (socket).
The thermocouple measurement option allows the user to measure thermocouple probes
of the types supported by the EA001A adapter.
Using the menus
On entering thermocouple simulation mode, type K will be the default function.
The display below will be shown indicating the currently selected range and output status :
Once in thermocouple mode, the menus available at the bottom of the screen will change
to reflect the thermocouple mode options - the available menu items are :
Selects the manual cold junction compensation mode
This allows cold junction value to be set to zero.
Selects the automatic cold junction compensation mode
This allows the calibrator to use the built in temperature sensor within the
adapter’s thermocouple plug to compensate for the cold junction measured
between the adapter plug and the UUT socket.
Thermocouple type
Cold junction
compensation type
Auto CJ = Automatic
Manual CJ = Manual
Temperature reading
Output status
(On / Standby)
Manual Cold junction soft key
Auto Cold junction soft key
Change thermocouple type soft key
MAN CJ
AUTO CJ