Transmille EA001A - Manual (Page 10)

EA001A THERMOCOUPLE SIMULATION & MEASUREMENT ADAPTER
OPERATION MANUAL
Transmille Ltd. Page 10
Setting Temperature Outputs
The output can be entered manually via the keypad or alternatively the output can be
deviated using the digital control.
Manual Keypad Entry
Use the calibrator keypad to key in the required CJC temperature, for example 24.5°C :
Deviate Output
To deviate the temperature output from the nominal value, use the deviation function. This
is controlled by using the left and right arrow keys to select the digit to be increased or
decreased
To increase or decrease the digit, simply use the up down keys on the calibrator’s
keyboard or use the digital potentiometer
OR
Increment Decrement Increment Decrement
Note : The thermocouple type, temperature and cold junction compensation settings can
be changed at any time by re-entered / selecting the setting required
Use the left right arrows to highlight the digit to be
adjusted (indicated by the underlined digit)
0 0 ENTER . 0 1