Timeguard SLFM360 - Manual (Page 3)

2
Wiring cover
Factory fitted
bridge wire
REMOVED
L1 L N E
Switched
Load
OUT
Factory fitted
bridge wire Levering area
Time On
setting
Lux -
Dusk/Dawn
setting
Mains
Supply
IN
In the above illustration:
- 4 core cable may be used
- there is no external junction box
- A bridge is provided, prewired to bridge
across live supply from AC mains to the
output load via the contacts
In the above illustration:
- the L1 L2 terminals are used to control a
DC load or if the load uses a different phase
or voltage supply from the AC mains in.
- factory fitted bridge must be removed to
isolate L1 & L2 terminals from AC mains in.
Cable clamps x2
Locators
L ocating
springs
pulled
back
L ocating
springs
fitted
position
Sensor
Levering area
D
E
F
G
L1 L N E
Switched
Load
OUT Mains
Supply
IN
SLFM360_Instruct_art_2.2.qxd 3/5/06 10:05 am Page 2