beautypg.com

65 inst alla tion & opera ting instructions, Helpline – Timeguard ELU5620 User Manual

Page 2

background image

6

5

INST

ALLA

TION

&
OPERA

TING

INSTRUCTIONS

2 0 A M P E L E C T R O N I C

2 4 H R / 7 D A Y T I M E

C O N T R O L L E R

Cat No. ELU5620

Setting Programmes - Day 2, 3 etc.

If the display still shows a day 1 “ON” or “OFF” programme press the Day
button and the day indicator will move above day 2. If, instead, the display
shows the clock time with the colon flashing press the Set button and hold down
for about 3 seconds until the display shows the first programme “ON” time for
day 1. Press the Day button again briefly and the day indicator will move above
day 2. In either case the display will change to with a flashing 1
(indicating programme 1 on day 2) appearing underneath the “ON” indicator.
The required programmes can now be set for day 2 in the same way as for day 1.
Days 3 to 7 can be programmed in the same way as for days 1 and 2.
Once the programming is complete press the Set button and hold down for about
3 seconds until the display returns to the correct time of day with the colon
flashing. The module is now in its operating condition.

Suspending Programmes

Press and hold down the Set button for about 3 seconds until the first “ON”
programme, day 1 is displayed. Press the Day button repeatedly until the day
indicator points to the day on which you wish to suspend the ON/OFF time.
Press the Set button repeatedly until the “ON” or “OFF” time of the programme
you wish to suspend is displayed.
Now press the O’ride button. A black “X” will appear indicating that both the
“ON” and “OFF” times for this programme have been suspended until
reinstatement by the user. There is no limit to the number of programmes
you can suspend.
To reinstate a suspended programme return to either the “ON” or “OFF” time
of the programme which has been suspended and cancel the black “X” by
pressing the O’ride button. The ON/OFF programme will now operate on
the selected day.

Reviewing The Programmes

Press and hold down the Set button for about 3 seconds until the first programme
“ON” time for day 1 is displayed. Press the Day button repeatedly until the day
indicator points to the day to be reviewed after which repeated brief pressing of
the Set button will display each programme or unused setting in sequence for
that day. At any point the setting may be altered, if required, by use of the hour
and minute buttons. To review another day press the Day button until the day
indicator points to the required day and use the Set button to select programme
times as before.

Overriding The Module

To override the programme in operation, and to immediately switch the device
ON or OFF, simply press the O’ride button. The display will change from “ON”
to flashing “INT” or vice versa. The override automatically cancels when the
third subsequent programme change occurs.

Specifications

● Voltage:

220-240V, 50Hz

● Ambient temperature

(operating):

-10°C to 40°C

● Switching capacity:

20A resistive
8A inductive
3kW tungsten lamps
3kW fluorescent lighting
2hp motor
1kW SON or metal halide lamps

● Battery back up:

factory fitted rechargeable
(1000 hours capacity)

● EC directives:

Conforms to

73/23/EEC
89/336/EEC

● Contacts:

Voltage free, normally open

ON

HELPLINE

020-8450-0515

Designed and manufactured in the U.K. 67-058-74 [2]

For a product brochure please contact:

Timeguard Ltd.

Victory Park, 400 Edgware Road,

London NW2 6ND

Tel: 020 8452 1112

or email [email protected]