Timeguard EMU56 User Manual

Page 7

pressing the Hrs and Mins buttons separately until the

desired time is displayed. Press the Set button briefly, and the

display will show with "INT" appearing

underneath the flashing "1". Note: INT = Interrupt and means

"OFF". The first "OFF" time for day 1 can now be

programmed by using the Hrs and Mins buttons. Press the

Set button briefly and the display shows and the

programme 2 "ON" time can be entered as for programme 1.
NB: Pauses of 15 seconds or more during programming will

result in automatic return to the operating condition.
Programming the module for day 1 should continue in this

way up to the programme eight if so desired.
Note: It is not necessary to enter all eight programmes

available to you on this day, those not required should be left

blank (––:––). You can also omit by not programming any

ON/OFF times on the day you require no switchings.

INT