Timeguard NTT07 - Manual (Page 7)

6
8. Programming
ON/OFF times:
The nTT06/07 has 4 independent on/off periods
available for programming each day. for the nTT07 there
is a choice of programming options, including 7 days the
same (24 hours), 5 + 2 days (where the weekdays are
the same, and the two weekend days are the same),
and 7 individual days. for the nTT06, 24 hours is the
only option, so all 7 days will be the same.
Press and hold the Prg button for 3 seconds. Whilst holding,
the word Hold should show on the display.
After 3 seconds, the mode screen will show.
for the nTT07 use Adv/ovr or Boost
to change the day grouping mode.
This will step through the
following options:
24hr – Mo Tu We Th fr Sa Su
5 day – Mo Tu We Th fr followed automatically in
programming by 2 day – Sa Su.
Individual day – Mo followed automatically in
programming by each of the other days.
for the nTT06, Mo Tu We Th fr Sa Su is the only option.
once the desired day grouping is selected, press Prg
to move onto programming on/off times. The display
will show Prog 1, with dashes for the
hours and minutes.
Example shown is for 5 + 2
programme.
Use Adv/ovr or Boost to set the hour
for the first on period. Press Prg to change to setting
the minutes. Use Adv/ovr or Boost to set the minutes.